Precautions for use of hot pot induction cooker

2019-07-04

At present, most of the hot pot restaurants use the induction cooker, so the induction cooker is also required to be paid attention to by the hot pot restaurant boss. The power of the induction cooker must have a special line configuration. The installation of the induction cooker needs to pay attention to the method of heat dissipation . Usually, it is necessary to clean and maintain the induction cooker. Everything is just because the induction cooker is your business tool.

CENHOT RESTAURANT HOT POT INDUCTION COOKER

1、Requirements for power supply of hot pot induction cooker

The use of restaurant hot pot induction cookers must use the three-hole socket with the technical specifications in line with the standard ground wire (preferably the product with CCC mark). Never use the two-hole socket without ground wire because the two-hole socket plug is plugged in. Easy to loose, not strong and does not meet national standards, which is easy to produce instantaneous ignition, current increases, more dangerous.

Do not place the socket directly above the hot pot induction cooker to prevent the heat from rising and burn the power.

kinds of plugs - CENHOT

If there are electrical appliances that are prone to sudden changes in current, such as electric welders, impact drills, electric hammers or other high-power electrical appliances, such as refrigerators, washing machines, water heaters, etc., which are used at the same time with induction cookers, they are more likely to damage the induction cooker and should cause Note that it is best to use a power strip with overcurrent protection or a stable power supply. It is best not to use other electrical appliances at the same time with the induction cooker , so as not to damage the induction cooker.

Proper use of the right voltage and frequency.

Please use the hot pot stock pots that can maximize the thermal efficiency.

Please use the appropriate size of the hot pot pots, the long-term use of oversized pots will easily lead to damage to the plate of the hot pot induction cookers.

The pots need to be poured on water or soup before it can be placed on the induction cooker.

2、Hot pot induction cooker installation should pay attention to heat dissipation

When the induction cooker is working, there is a certain temperature inside the body. In order to make the induction cooker play a better role and work normally, and prolong its service life, this part of the heat should be discharged in time. Therefore, the position of the induction cooker is as good as possible for air circulation.Dissipate heat, and do not block the air inlet and outlet of the induction cooker.

After the induction cooker is used, there is still residual heat inside the furnace. It is necessary to remind the power supply to stop the switch, and the power supply will continue to make the induction cooker fan continuously rotate for 1 minute to dissipate heat. When the safe temperature is reached, the rotation will be automatically stopped before the power can be turned off.

HOT POT INDUCTION COOKER FAN - CENHOT

3、Daily maintenance cleaning of hot pot induction cooker

Unplug the power cord before scrubbing.

The hot pot induction cooker is the same as other electrical appliances. It should be waterproof and moisture-proof during use and avoid contact with harmful liquids. Do not use solvents or gasoline to clean the furnace surface or the furnace. Also, do not use hard tools such as metal brushes or gauze to wipe the dirt on the surface of the stove. Do not use cold water immediately after using or just using the end of the furnace.

When the panel of the hot pot induction cooker is dirty or the oil stain causes discoloration, please wipe it with detergent powder, toothpaste or car wax, and then wipe it with a towel. Wipe the body and control panel with a soft, damp cloth. If you encounter oil that is difficult to wipe, wipe it with a neutral detergent and wipe it with a soft, damp cloth until there is no residue.

Do not rinse directly with water or immerse in water.

Always keep the body clean so that cockroaches, insects, etc. enter the furnace, causing the body to malfunction.

After the suction/exhaust cover is removed, it can be washed directly with water, or the cotton stick can be used to remove the dust. You can also add some detergent to remove it with a toothbrush.

4、Hot pot induction cooker troubleshooting and maintenance

If abnormal conditions such as abnormal shutdown or alarm are found during the use of the hot pot cooker, be sure to stop using it immediately. Contact and consult the factory maintenance department in time. If there is any problem, please contact the professional maintenance personnel.Do not disassemble it yourself.

If any questions, pls do not hesitate to contact CENHOT:

Email: gl.zhang@cenhot.com

Fax/Tel: 0757-28370801

Website: www.cenhot.com

If you’re looking for hot pot and BBQ equipment for your restaurant, then you’ve come to the right place. We have over several years of professional experience in hot pot induction cooker and BBQ grill technicians and our products obtained many national patents at present.

Copyright © 2015-2024 Cenhot Catering Development Co.,Ltd..All Rights Reserved.

Chat now

Live Chat

    You can contact us any way that is convenient for you. We are available 24/7 via fax, email or telephone.